Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters - Manual (Page 12)

Location and Function of Parts and Controls
12
 : Adjustable/can be set
×
: Not adjustable/cannot be set
1) Does not function when the RGB signal with the
quantization range set to Full is selected. It functions,
however, if [Gamma] is set to [S-LOG2(SDR)] or [S-
LOG3(SDR)] in the [Color Profile] menu.
2) Fixed to [×1] when the HD signal or the computer signal
of HDMI is input.
3) Fixed to [16:9] with 720P input signal.
4) Becomes [1.896:1] with 2048 × 1080 input signal.
5) Excludes 640 × 480/60*P. Fixed to [16:9] with 1280 × 720/
50P, 60*P. (* Also compatible with 1/1.001.)
6) In effect with SD format
7) Functions when the YCbCr signal is input.
8) Does not function when the computer signal of HDMI is
input.
9) Functions when the [HDMI Auto] menu (page 39) of the
[Screen Aspect] menu is set to [Off].
10) For the operable input signal, see “Aperture Modification
Frequency” (page 94).
11) Sets when the SDI signal is input
12) Enabled only when the signal system is 480/59.94i.
13) When the composite signal is input and [Under Scan] is
selected, the blanking area of the horizontal direction is
masked.
14) Enabled during HD-SDI only
15) Does not function when the software version is 1.1 or later,
and [Gamma] is set to [S-LOG3(SDR)], [S-LOG2(SDR)],
[S-LOG3(HDR)], [S-LOG2(HDR)], [SMPTE
ST2084(HDR)], [ITU-R BT.2100(HLG)], or [S-
LOG3(Live HDR)].
16) Cannot be selected in the HDR display. [On] is always set
for signals of vertical frequency 24 Hz, 25 Hz, 48 Hz, and
50 Hz. [Off] is always set for signals of 30 Hz and 60 Hz.
Blending
     
Error Notify Clear Ч    1) Ч  1)
Audio Level Meter 11) Ч     Ч
ALM Hold Reset 11) Ч     Ч
Time Code Ч     Ч
Flicker Free 16)      
Closed Caption Ч  12)  14) Ч Ч Ч
Item
Input signal
Analog SDI HDMI
Composite SD 3G/HD
YCbCr YCbCr RGB XYZ