Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters - Manual (Page 26)

Using the Menu
26
Notes
 The menu disappears automatically if not
operated for about one minute.
 Menu items displayed in gray cannot be selected.
 This menu is not displayed when [Pixel Zoom] is
set to on.
2
Using the UP or DOWN button or PHASE knob,
select the desired item. (Example: select the
[Channel Configuration] menu by pressing the
DOWN button.)
3
Press the ENTER or Ent button
Level 1 of the selected menu is displayed.
The current settings are displayed in place of the

marks on the illustrations of the menu screen.
4
Repeat steps 2 and 3 until the desired menu is
displayed.
For more information about setting and
adjustments, see below.
Display example
Choosing the setting value
The method for selecting the value is different due to the
menu item.
 Selecting in setting mode
 Selecting from the setting list
When selecting in setting mode
1
Using the UP or DOWN button or PHASE knob,
select the desired item and press the ENTER or Ent
button.
The cursor moves to the setting value and the
monitor enters in setting mode.
Indicates that the menu continues
onto next page.
Indicates that this item has
sub-list. You can go to the
lower level. Chooses the setting value.
Indicates that the menu is continued
from previous page.
Enters numerical values.