Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters - Manual (Page 27)

Using the Menu
27
Display example
2
Using the UP or DOWN button or PHASE knob,
select the setting value.
3
Press the ENTER or Ent button.
The setting is confirmed and the cursor returns to
the item.
When selecting from the setting list
1
Using the UP or DOWN button or PHASE knob,
select the desired item in the setting list.
Display example
2
Press the ENTER or Ent button.
The setting is confirmed and the display returns to
the menu of the upper level.
Entering numerical values
1
Using the UP or DOWN button or PHASE knob,
select the desired item and press the ENTER or Ent
button.
The cursor moves to the setting value and the
monitor enters in setting mode.
Display example
2
Select the value in one of the following three ways:
 Enter the value directly using the numeric
buttons and press the ENTER or Ent button. (only
the item with a value of setting range over 0)
 Select the value using the UP or DOWN button.
 Select the value using the PHASE knob.
3
Press the ENTER or Ent button.
The setting is confirmed and the cursor returns to
the item.
Entering characters
1
Using the UP or DOWN button or PHASE knob,
select [New Name] or the existing name.
The “---“ means that one or more characters can be
entered in sequence after the existing name.
2
Press the ENTER or Ent button.
3
Using the UP or DOWN button or PHASE knob,
select the characters that you wish to enter.
Display example
When you press the UP button or turn the PHASE
knob clockwise, the characters and symbols appear
in the sequence shown below.
Cursor