FUJITSU MB91460 SERIES FR60 - Manual (Page 275)

259
Chapter 18 Timebase Counter
6.Settings
6. Settings
*: For the setting procedure, refer to the section indicated by the number.
• Settings required to specify the oscillation stabilization wait time for the main clock
See “ Chapter 22 Main Oscillation Stabilisation Timer (Page No.289) ”.
• Settings required to specify the PLL lock wait time
See “ Chapter 19 Timebase Timer (Page No.263) ”.
Table 6-1 Settings Required to Specify the Oscillation Stabilization Wait Time
Setting Setting register
Setting
procedure*
Oscillation stabilization wait time setting Standby control register (STCR) See 7.1.
Table 6-2 Settings Required to Setup an INITX Pin Reset
Setting Setting item Setting procedure
INITX pin input
Refer to the oscillator parameters and the reset
parameters in the Data Sheet.
–