FUJITSU MB91460 SERIES FR60 - Manual (Page 620)

604
Chapter 31 External Bus
10.DMA Access Operation
■
2-Cycle Transfer (I/O -> External)
Figure 10-10 "Timing Chart for 2-Cycle Transfer (I/O -> External)" shows the operation timing chart for (TYP3-
0=0000
B
, AWR=0008
H
, IOWR=00
H
).
Figure 10-10 "Timing Chart for 2-Cycle Transfer (I/O -> External)" shows a case in which a wait is not set for
memory and I/O.
Figure 10-10 Timing Chart for 2-Cycle Transfer (I/O -> External)
• The bus is accessed in the same way as an interface when the DMAC transfer is not performed.
• In basic mode, DACKn/DEOPn is output both in the transfer source bus access and transfer destination bus
access.
10.8 2-Cycle Transfer (I/O -> SDRAM/FCRAM)
This section describes the operation of two - cycle transfer (I/O device to SDRAM/FCRAM).
memory address I/O address idle
DACKn
DEOPn
DACKn
DEOPn
DREQn
MCLK
AS
CSn
CSn
A[31:0]
D[31:0]
WRn
RD
FR30
compatible
mode
Basic
mode