FUJITSU MB91460 SERIES FR60 - Manual (Page 770)

754
Chapter 36 Input Capture
6.Settings
6. Settings
*: For the setting procedure, refer to the section indicated by the number.
*: For the setting procedure, refer to the section indicated by the number.
Table 6-1 Settings Necessary for Using Input Capture
Settings Setting register
Setting
procedure*
Free-run timer settings
See “ Chapter 35 Free-Run Timer (Page No.733) ”
–
Free-run timer activation
Input pin ICU0-ICU7 settings
Port function register (PFR14.0 - PFR14.7)
Extra port function register (EPFR14.0 -
EPFR14.7)
7.2
Active edge polarity selection for external input
Input capture control register (ICS01, ICS23,
ICS45, ICS67)
7.1
Table 6-2 Required Settings for ICU Interrupt
Settings Settings register
Setting
procedure*
Input Capture interrupt vector,
Input capture interrupt level settings
See “ Chapter 24 Interrupt Control (Page No.311) ” 7.3
Input capture interrupt settings
Interrupt request clear
Interrupt request permission
Input capture control register (ICS01, ICS23,
ICS45, ICS67)
7.5