5 auto-wait cycle – FUJITSU MB91460 SERIES FR60 User Manual
Page 582
Advertising

566
Chapter 31 External Bus
5.Operation of the Ordinary bus interface
Figure 5-4 Timing Chart for the Write -> Write Operation
•
Setting of the W05/W04 bits of the AWR register enables 0-3 write cycles to be inserted.
•
After all of the write cycles, recovery cycles are generated.
•
Write recovery cycles are also generated if write access is divided into phases for access with a bus width
wider than that specified.
5.5 Auto-Wait Cycle
This section shows the operation timing for the auto-wait cycle.
■
Auto-Wait Cycle Timing
"Timing Chart for the Auto-Wait Cycle" shows the operation timing for (TYP3-0=0000
B
, AWR=2008
H
).
Write
Write
Write recovery *
MCLK
AS
CSn
WRn
D[31:0]
A[31:0]
Advertising