Genicom microLaser 170 - Manual (Page 100)

Zebra XiII Printer User’s Guide 87
Specifications
Power Line Cord Specifications
• The overall length must be less than 9.8 ft. (3.0 meters)
• It must be rated for at least 5 A, 250 V.
• The chassis ground (earth) MUST be connected to assure safety and
reduce electromagnetic interference. The ground connection is handled
by the third wire (earth) in the power line cord. See Figure 19.
• The AC power plug and IEC 320 connector must bear the certification
mark of at least one of the known international safety organizations
shown in Figure 20.
Figure 19. Power Line Cord
Figure 20. International Safety Organizations
xi2ch6 Page 87 Tuesday, April 23, 1996 12:41 PM