Rs-232 interconnections – Genicom microLaser 170 User Manual

Page 120

Advertising
background image

Zebra XiII Printer User’s Guide

107

RS-232 Interconnections

The Zebra XiII printer is configured as Data Terminal Equipment (DTE).
Figure 24 illustrates the internal connections of the printer’s RS-232 con-
nector.

Figure 25 illustrates the connections required to interconnect the XiII printer
with the standard 9 pin serial port connector on a PC.

Note:

If using a 9 pin to 25 pin adapter plug attached to the computer, use a null
modem cable between the adapter plug and the Zebra printer.

To connect the printer to other DTE devices with DB-25 connectors (such
as the serial port of a PC), an RS-232 null modem (crossover) cable should
be used.

Figure 24. RS-232 Connections

xi2appa Page 107 Tuesday, April 23, 1996 1:05 PM

Advertising
This manual is related to the following products: