Genicom microLaser 170 User Manual

Page 65

Advertising
background image

Operation

52

Zebra XiII Printer User’s Guide

Format 1: Simple Text and a Barcode

Format 2: Saving a Label Format As a Graphic Image

Line

#

Type this label format:

You’ll get this printout:

1.

^XA

2.

^LH30,30

3.

^FO20,10^AD^FDZEBRA^FS

4.

^FO20,60^B3N,Y,20,N^FDAAA001^FS

5.

^XZ

Line #1: Indicates start of label format.
Line #2: Sets label home position (in dots) from the upper left-hand corner of the label.
Line #3: Sets field origin, selects font “D”, defines field data as “ZEBRA”.
Line #4: Sets field origin, selects bar code Code 39, sets barcode height at 20 dot rows, defines field data
for bar code as “AAA001".
Line #5: End of label format

Line

#

Type this label format:

You’ll get this printout:

1.

^XA

Same as Format 1, but this format was also
saved in the printer’s memory as a graphic
image named “FORMAT2”.

2.

^LH30,30

3.

^FO20,10^AD^FDZEBRA^FS

4.

^FO20,60^B3N,Y,20,N^FDAAA001^FS

5.

^ISFORMAT2,N

6.

^XZ

7.

^XA

8.

^ILFORMAT2

9.

^XZ

Line #1: Indicates start of label format.
Line #2: Sets label home position (in dots) from the upper left-hand corner of the label.
Line #3: Sets field origin, selects font “D”, defines field data as “ZEBRA”.
Line #4: Sets field origin, selects bar code Code 39, sets barcode height at 20 dot rows, defines field data
for bar code as “AAA001".
Line #5: Saves the format in the printer’s memory as a graphic image named “FORMAT2:, the “N” indi-
cates “do not print after saving.”
Line #6-7: (See Format 1)
Line #8: Load and print the graphic image saved as “FORMAT2”.
Line #9: (See Format 1)

xi2ch2 Page 52 Tuesday, April 23, 1996 1:45 PM

Advertising
This manual is related to the following products: