Chapter 2 operation, Chapter 2, Operation – Genicom microLaser 170 User Manual

Page 36: Operating your zebra xi ii -series printer

Advertising
background image

Zebra XiII Printer User’s Guide

23

Chapter 2

Operation

Operating Your Zebra XiII-Series Printer

Now that your printer is ready for operation, how does it work? The Zebra
XiII-Series printer is designed to receive instructions from a host computer,
such as an IBM-compatible PC. To create a label, you will either need to
write a format in ZPL II

, which is a programming language for creating

label formats, or you will need to use a software program designed to for-
mat labels for the Zebra XiII-Series printer. If you are using label design
software, refer to the instructions provided with your software package to
determine how to do this.

If you are using, or plan to use, ZPL II

programming language to format

your labels, make sure you have a copy of the ZPL II

Programming Guide.

Refer to the mail/fax-in card at the front of this book to obtain a copy. For
some sample ZPL II

label formats, refer to page 51.

xi2ch2 Page 23 Tuesday, April 23, 1996 1:45 PM

Advertising
This manual is related to the following products: