Genicom microLaser 170 - Manual (Page 122)

Zebra XiII Printer User’s Guide 109
interconnecting to the printer’s DB-25 connector. Figure 28 illustrates the
internal connections of the XiII printer’s RS-422 or RS-485 connector.
Parallel Data Port
A standard 36-pin parallel connector is available at the rear of the printer for
connection to the data source. When the printer is properly configured for
Figure 27. RS-422/RS-485 Interconnecting Cable
Figure 28. RS-422/RS-485 Connections
xi2appa Page 109 Tuesday, April 23, 1996 1:05 PM