Genicom microLaser 170 - Manual (Page 121)

108 Zebra XiII Printer User’s Guide
When the printer is connected via its RS-232 interface to Data Communica-
tion Equipment (DCE) such as a modem, use a standard RS-232 (straight-
through) interface cable. Figure 26 illustrates the connections required for
this cable.
RS-422/RS-485 Interconnections
The Zebra XiII printer may be connected to a host by either an RS-422 or an
RS-485 interface. The DB-25 connector on the rear of the printer uses spe-
cific pins for this purpose. Figure 27 illustrates the required cable wiring for
Figure 25. 9 Pin to 25 Pin Interconnecting Cable
Figure 26. 25 Pin to 25 Pin Interconnecting Cable
xi2appa Page 108 Tuesday, April 23, 1996 1:05 PM