Chapter 5 options, Chapter 5, Options – Genicom microLaser 170 User Manual

Page 88: Rewind option

Advertising
background image

Zebra XiII Printer User’s Guide

75

Chapter 5

Options

Note:

Your printer may not have all of the options described in this chapter. Call
your sales representative for more information about these options.

Rewind Option

Your Zebra XiII-Series printer may be equipped with the optional Media
Rewind capability required for Rewind and Peel-Off modes of operation.

In Rewind Mode, both labels and backing material rewind internally onto a
3-inch core. A Rewind Bracket guides the media back to the Rewind Spin-
dle after printing.

In Peel-off Mode, only the backing rewinds onto the Rewind Spindle. The
Peel/Tear Bar separates the label from the backing and the Label Available
Sensor activates to allow the operator to remove a printed label before sub-
sequent labels print. Select either the Rewind or Peel-off Print Mode from
the front panel display.

xi2ch5 Page 75 Tuesday, April 23, 1996 12:36 PM

Advertising
This manual is related to the following products: