Mocomtech SLM-5650 - Manual (Page 130)

SLM-5650 Satellite Modem Revision 1
Remote Control MN/SLM5650.IOM
B–8
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Frequency TFQ= 9 bytes Command or Query.
Tx Frequency, 52 to 88 MHz, 104 to 176 MHz, and 950 MHz to
2000 MHz. Resolution=100Hz.
Example: TFQ=0140.9872
TFQ=
TFQ?
TFQ*
TFQ# TFQ? TFQ=xxxx.xxxx
(see description of
arguments)
Tx Overhead
Type TFM= 1 byte, value
of 0 thru 2, 4 Command or Query.
Tx Overhead Type, where:
0=None (Unframed)
1=IBS
2=IDR
4=AUPC
Depending on Modem mode, not all of these selections will be
valid.
Example: TFM=0 (selects Unframed mode) TFM=
TFM?
TFM*
TFM# TFM? TFM=x
(see description of
arguments)
Priority System = MOM (Highest priority), RFB, ITF, TFM, TFT, TMD, TCR, and TDR (Lowest Priority), indicated by shading. Any change to
a higher priority parameter can override any of the parameters of lower priority.