Mocomtech SLM-5650 - Manual (Page 138)

SLM-5650 Satellite Modem Revision 1
Remote Control MN/SLM5650.IOM
B–16
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx Reed-
Solomon
Decoding RRS= 1 byte, value
of 0 or 1 Command or Query.
Rx RS encoding
0=Off
1=On
Depending on Modem mode, not all of these selections will be
valid.
Example: RRS=0 (RS encoding is Off) RRS=
RRS?
RRS*
RRS# RRS? RRS=x
(see description of
arguments)
Rx
Reed-Solomon
Code Word RCW= 1 byte, value
of 0 to 5 Command or Query.
Rx RS encoding
0 = RS(225,205,10)
1 = RS(219,201,9)
2 = RS(208,192,8)
3 = RS(194,178,8)
4 = RS(126,112,7)
5 = RS(220,200,10)
Depending on Modem mode, overhead type, and data rate, not all of
these selections will be valid.
Example: RCW=0 (This is a ‘don’t care’ if RS is Off under TRS) RCW =
RCW?
RCW *
RCW # RCW? RCW=x
(see description of
arguments)
Rx
Reed-Solomon
Interleaver
Depth RRD= 1 byte, value
of 0 to 2 Command or Query.
Rx RS encoding
0 = Interleaver Depth 4
1 = Interleaver Depth 8
2 = Interleaver Depth 16
Depending on Modem mode, overhead type, and data rate, not all of
these selections will be valid.
Example: RRD=0 (This is a ‘don’t care’ if RS is Off under RRS) RRD =
RRD?
RRD *
RRD # RRD? RRD =x
(see description of
arguments)