Mocomtech SLM-5650 User Manual
Page 86
SLM-5650 Satellite Modem
Revision 2
Front Panel Operation
MN/SLM5650.IOM
4–16
Select Modem Type, FreqBand or Interface, then press [E].
Modem:
OM-73
This selects Linkabit OM-73 modem compatibility mode.
MIL-165A
This selects functionality defined by MIL-STD-188-165A.
IESS-308
This selects functionality defined by IESS-308, the Intelsat Intermediate
Data Rate standard.
IESS-309
This selects functionality defined by IESS-309, the Intelsat Business
Services standard.
IESS-310
This selects functionality defined by IESS-310, the Intelsat 8-PSK
Intermediate Data Rate standard.
TURBO
This selects functionality defined by IESS-315 plus Comtech EF Data
Turbo mode interoperability.
16-QAM
This mode allows 16-QAM to be selected as a modulation type.
AUPC
This mode allows Automatic Uplink Power Control to be used.
Frequency Band
Permits the user to select:
70/140 MHz, (52 – 88 MHz, 104 – 176 MHz)
L-Band, (950 – 2000 MHz)
Interface
Permits the user to select:
EIA-530, (native interface, standard equipment)
HSSI, (native interface, standard equipment)
GigaBit Ethernet, (optional data interface)
IMPORTANT
When selecting an IF frequency band both transmit and receive operate
in the selected band. Operation of transmit in one IF frequency band
and the receive in the other IF frequency band is not permitted. When
selecting a data interface type, a native interface can be selected even
if an optional interface is installed, but an optional interface can only be
selected if it is installed. Both transmit and receive must use the
selected interface type. Transmitting using one interface type and
receiving using another interface type is not permitted.
Mode: Modem:TURBO FreqBand:L-Band
Interface:EIA-530 (
efE)