Mocomtech SLM-5650 - Manual (Page 141)

SLM-5650 Satellite Modem Revision 1
Remote Control MN/SLM5650.IOM
B–19
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx
Reacquisition
Time REA= 3 bytes Command or Query.
Rx reacquisition time, in Seconds, ranging from 0 to 999.
Example: RSW=000 (selects 0 seconds) REA=
REA?
REA*
REA# REA? REA=xxx
(see description of
arguments)
Rx Clock
Source RCK= 1 byte, value
of 0 thru 2 Command or Query.
Rx Clock Source , where:
x=Rx Clock Source, where:
0=Rx Satellite
1=Internal
2=Tx-Terrestrial
3=External Clock (only valid with the G.703 Option Card)
Example: RCK=2 (selects Tx-Terrestrial)
RCK=
RCK?
RCK*
RCK# RCK? RCK=x
(see description of
arguments)
Rx Buffer
Programming
Mode RBM= 1 byte, value
of 0 or 1 Command or Query.
Rx Buffer Programming Mode, where:
0 = Buffer Size is programmed in Bits.
1 = Buffer Size is programmed in milliseconds.
Example: RBM=0 RBM=
RBM?
RBM*
RBM# RBM? RBM=x
(see description of
arguments)
Rx Buffer Size RBS= 8 bytes Command or Query.
Rx Buffer Size (in either bits or milliseconds, see RBM command),
where:
xxxxxxxx=Rx Buffer Size
Example: RBS=00000512 RBS=
RBS?
RBS*
RBS# RBS? RBS=xxxxxxxx
(see description of
arguments)
Modem
Reference
Clock MRC= 1 byte, value
of 0 thru 3 Command or Query.
Modem Reference Clock (For Frequency Accuracy), where:
0=Internal
1=External 1 MHz
2=External 5 MHz
3=External 10 MHz MRC=
MRC?
MRC*
MRC# MRC? MRC=x
(see description of
arguments)