Mocomtech SLM-5650 - Manual (Page 77)

SLM-5650 Satellite Modem Revision 2
Front Panel Operation MN/SLM5650.IOM
4–7
4.3.1 Select: Config
The following choices are presented:
Transmit Permits the user to configure the Tx parameters.
Receive Permits the user to configure the Rx parameters.
Mode Permits the user to configure the modem operating modes.
AUPC Permits the user to configure the AUPC parameters. This menu
only appears if the modem type has been set to AUPC.
Ref Permits the user to configure the modem reference.
Mask Permits the user to mask selected alarms.
Reset Permits the user to reset the modem to a default status.
Remote Permits the user to define whether the unit is being controlled
locally or remotely as well as the communication parameters.
(See Note.)
IMPORTANT
The modem may be monitored over the remote control interface at
any time. When in Local mode, however, configuration parameters
may only be changed through the front panel.
CONFIG: Transmit Receive Mode AUPC
Ref Mask Reset Remote (
efE)