Sony HM-982RW - Manual (Page 17)

Controls and indicators
17
Knowledge section
Preparation section
Application section
Basic section
Operation of remote control unit
Loading batteries
1 Remove the cover. 2 Insert batteries. 3 Close the cover.
8Keys related to timer and sound
SLEEP key
Press to set the sleep timer. l
TIMER key
Press to execute or cancel a timer program.
g
SOUND key
Press to select S.DIRECT, N.B.1, N.B.2 or TONE.
£
TONE key
This key is used to adjust the response of low, medium
and high frequencies.
£
MUTE key
Press to mute sound temporarily. £
VOLUME keys
Press to adjust the listening volume or tone. ™£
Press to select the PTY SEARCH. ›
7 Keys related to CDR, TAPE
TWIN REC key
Press during CD playback to record the track being
played on a CD-R/RW and tape simultaneously.
Press during CD stop mode to record all the tracks in the
disc on a CD-R/RW and tape simultaneously.
¨Ø
CD
=CDR O.T.E. key
Press during CD playback to record the track being
played on a CD-R/RW with one-touch operation.
Press during CD stop mode to record all the tracks in
the disc on a CD-R/RW with one-touch operation.
YIŒ„
RANDOM key
Press to play the tracks in a CD in a random order. p
REPEAT key
Press for repeat playback of a CD, CD-R/RW. o
Plug the power cord into a power outlet and press
the POWER(
) key on the remote control unit to
switch the power ON. Then press the key of the
function you want to control.
Operation
÷ When pressing more than one remote control keys suc-
cessively, press the keys securely by leaving an interval of
1 second or more between keys.
÷ Insert two R6 (“AA”-size) batteries fol-
lowing the polarity indications.
tape loading mechnism
6m
30˚ 30˚
¡
6DOLBY NR key
Dolby NR mode (on/off) is switched. ª
CD =TAPE O.T.E. key
Press during CD playback to record the track being played
on a tape with one-touch operation.
Press during CD stop mode to record all the tracks in the
disc on a tape with one-touch operation.
‰ˇ
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor,
malfunction may occur. In such a case, change the installation position to avoid malfunction.
Notes Notes