Sony HM-982RW - Manual (Page 52)

52
Various playback features
Preparation section
Basic section
Application section
Knowledge section
To cancel Skip Play
Playing tracks by skipping registered
tracks
(SKIP PLAY)
Select the “CD” or “CDR” input. Be sure to put the CD player or CD recorder in stop mode. ¢§
When a disc in which Skip Track is registered is played
with Skip Play "On", Skip Play occurs whether the
disc is played with the CD player or CD recorder.
1 Press the MENU key.
2 Press a MULTI CONTROL keys repeatedly until
"Skip Play ?" is displayed.
3 Press the SET key.
4 Press a MULTI CONTROL keys to select "On" and
press the SET key.
5 Load a CD-R/RW with Skip Track registration.
Q
6 Start playback.
To play a CD-R/RW disc on a CD player, it is required
to finalize the disc.
∏
SKIP PLAY
S k i p
P l a y ?
SKIP PLAY
S k i p P
O n
SKIP PLAY
C D R 0 1
0 : 0 2
MENU
#
#
MULTI
CONTROL
\ \
SET
#
#
MULTI
CONTROL
SET
CD
6
CD-R
6
CD CDR
CD 6
tape loading mechnism
SET
MENU
MULTI CONTROL
1 Perform steps 1 to 3 above.
2. In step
4, select "Off" and press the SET key.
Remote control operation
SKIP PLAY
/PTY
When a disc in which Skip Track is registered with
another CD recorder is played on the CD recorder of this
system, Skip Play may sometimes not occur.
Note Note
Each press switches alternately.
"SKIP PLAY" displayed (On)
"SKIP PLAY" not displayed (Off)
CD-R
6
or
Blinks