Sony HM-982RW - Manual (Page 36)

Recording on CD-R/RW
36
Preparation section
Basic section
Apprication section
Knowledge section
Recording on CD-R/RW
1. Load a disc.
When a non-used disc or a disc which has not been unfinalized is loaded
in the CD recorder, the CD-R IN indicator may sometimes blink for a while.
"OPC (Optimum Power Control)"
‡
(Loading a CD-R/RW in the CD recorder)
÷ To record audio from a CD, load the source music CD in the CD player and load the
CD-R/RW in the CD recorder.
÷ If the CD-R IN indicator blinks after the tray has been closed, the disc cannot be
ejected.
÷ When "FINALIZED CD-RW" is displayed, additional recording to the disc is
possible after unfinalizing it. a
Even when the CD contains the recording of text
data, it is not copied onto the CD-R/RW.
1 Press CD recorder tray open/close (0) key.
2 Place a recordable CD-R or CD-RW disc.
78
3 Press CD recorder tray open/close (0) key.
tape loading mechnism
2 2
4 4
1 1
0
CD-R IN
0
CD-R IN
\
Blinks Lights
÷ Ensure that the CD-R/RW has no scratch or dirt on the recording surface.
÷ If the CD-R/RW has previously been recorded, the end of the last track is searched
automatically to start recording from there.
The CD-R IN indicator blinks first, then it lights steadily when the disc has
been identified (now the disc is ready for recording).
Pause the
recording Stop the re-
cording
Stop the recording
Pause the recording
The label must be on top.
Do not touch the played surface