Muting the sound temporarily (mute), Listening through headphones, Balance adjustment (bal.) tone adjustment (tone) – Sony HM-982RW User Manual

Page 23

Advertising
background image

Playback of CD

23

Knowledge section

Preparation section

Application section

Basic section

Muting the sound temporarily (MUTE)

÷ Press again to resume the original volume.

÷ This is also cancelled when the volume is adjusted.

Bass and treble compensation
(N.B.: Natural Bass circuit)

Blinks

Lights

2 Adjust the volume with the VOLUME keys.

÷ Headphones with a stereo mini plug can be connected.

÷ The sounds from all speakers are cut off.

Listening through headphones

1 Insert the headphone plug into the PHONES jack.

PHONES

Balance adjustment (Bal.)

Tone adjustment (TONE)

MUTE

\

\

The balance of volumes from the left and right speak-
ers can be adjusted as follows.

Blinks

1 Press the TONE key to select ”Bass”.

Adjust the level using the VOLUME keys.

2 Press the TONE key again while “Bass” is

displayed to select “Mid”. Adjust the level
using the VOLUME keys.

÷ The Bass, Mid and Treble can be adjusted independ-

ently in the range from –4 to +4.

1 Press the MENU key.

2 Press the MULTI CONTROL keys to select

“Bal. ?” (Balance), then press the SET key.

3 Adjust the left and right speaker balance by press-

ing the MULTI CONTROL keys.

4 Press the SET key.

4 Press the TONE key once more.

Remote control unit only

Remote control unit only

3 Press the TONE key again while “Mid” is

displayed to select “Treble”. Adjust the
level using the VOLUME keys.

Hearing sound

MUTE

TONE

VOLUME

DOWN

UP

B a s s

0

SOUND

B a l .

?

B a l .
C e n t e r

N.B.1

#

#

MULTI

CONTROL

#

#

MULTI

CONTROL

SET

After this adjustment, the N.B. effect will be dis-
abled.

MENU

Remote control unit only

Each press switch the modes as follows.

“S.DIRECT” ...... The source signal from a CD or

TAPE can be reproduced with high
fidelity to the original sound by
bypassing the tone control cir-
cuitry in the main unit.

Goes off ........... The source signal is processed by

the tone control circuitry before
being output from the main unit.

“N.B.1” ............. The lowest and highest frequen-

cies are enhanced according to
the current volume level.

“N.B.2” ............. Only the lowest frequencies are

enhanced.

The low frequencies (Bass), medium frequencies
(Mid) and high frequencies (Treble) can be adjusted
separately.

÷ This adjustment is not available while "S.DIRECT" is

selected. "X" is displayed to indicate this.

"Display in menu mode (Display "X")"

)

÷ Press the

%

%

%

%

%

(up) key to shift the balance toward the Right

channel or press the

fi

fi

fi

fi

fi (down) key to shift it toward the

Left channel. "Center" is displayed when the balance is
set to the center.

Advertising