Sony HM-982RW - Manual (Page 61)

61
Knowledge section
Preparation section
Application section
Basic section
Convenient recording of CD player output
Start recording.
4
To interrupt a recording
Press the
7 (stop) key on the main unit or 7 STOP
key on the remote. (This stops both recording and
playback.)
CD =CDR
÷ When either the CD playback or CDR recording operation
stops, the other operation also stops.
÷ When you are operating the main unit, select "O.T.E. Mode"
in the menu mode, then select "CD = = = = =CDR <Norm>" and
press the SET key to start recording.
÷ "CDR Writing" is displayed when recording completes.
÷ With certain discs, digital-to-digital recording may be prohib-
ited by SCMS ( A). Such a disc should be recorded using
the analog output signal. e
To finalize the recorded CD-R/RW ∏
Display "CDR Writing" indicates that recorded data is
being written in the CD-R/RW. Do not apply vibra-
tions or impact during recording and "CDR Writing"
display.
If the power cord is unplugged from the power outlet
or a power failure occurs during recording, the disc
data may be destroyed and the disc may become
unusable.
During digital-to-digital recording, the CD recorder
may encounter a track with which digital-to-digital
recording is prohibited. In this case, "SCMS"(
A) is
displayed and recording pauses temporarily, but play-
back of the source continues and recording restarts
whenever a track with which digital-to-digital record-
ing is permitted is encountered. However, if "SCMS"
is displayed with the first track to be recorded, the
track as well as the subsequent tracks will not be
recorded.