Sony HM-982RW - Manual (Page 55)

55
Knowledge section
Preparation section
Application section
Basic section
Convenient recording of CD player output
\
Simultaneous, twin recording feature from CD to CD-R/RW and Tape
Program recording
Program playback + TWIN REC
Simultaneous recording of programmed CD tracks
onto both CD-R/RW and tape.
(Convenient for recording only the desired CD
tracks in the desired order.)
ˆ
With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where
recording is not possible. Please use single-side recording if this is to be avoided.
Note Note
\
Single-track twin recording
Simultaneous recording of the CD track being played
onto an CD-R/RW and tape.
(This is convenient for recording of desired tracks
from a disc being heard for the first time.)
Á
\
Simultaneous recording of an entire CD onto an CD-
R/RW and tape.
Á
All-track twin recording
To record CD simultaneously onto an CD-R/RW and tape
Twin recording onto CD-R/RW and tape (TWIN REC)
Display "CDR Writing" indicates that recorded data is being written in the CD-R/RW. Do not apply vibrations or
impact during recording and "CDR Writing" display.
If the power cord is unplugged from the power outlet or a power failure occurs during recording, the disc data may
be destroyed and the disc may become unusable.
CD CDR
=
TAPE
CD CDR
=
TAPE
Reordering CD tracks in a desired sequence and recording them simultaneously onto CD-R/RW and tape