Sony HM-982RW - Manual (Page 80)

80
In case of difficulty
Preparation section
Basic section
Apprication section
Knowledge section
Important Items
Maintenance
Maintenance of the unit In regard to contact cleaner
Do not use contact cleaners because it could cause a
malfunction. Be specially careful not to use contact
cleaners containing oil, for they may deform the plastic
component. When the front panel or case becomes dirty, wipe with
a soft, dry cloth. Do not use thinner, benzine, alcohol,
etc. for these agents may cause discoloration.
Cleaning the heads and peripheral components
For maintaining the best condition of the deck and for
longer service life, always keep the heads, capstan
and pinch roller clean. For the cleaning, use a
cleaning cassette available in audio stores. For
details, read the instruction manual of your cleaning
cassette. Demagnetizing the head
When the recording / playback head is magnetized,
the sound quality will deteriorate. In such a case,
demagnetize the head using a commercially available
demagnetizer (head eraser).
Care of lens
When the lens in the pick-up gets dirty, malfunctions
including the impossibility of playback may occur. The
lens should be cleaned using a commercially-available
camera lens blower, etc. Do not touch the lens to pre-
vent damaging the mechanism. Also do not use a lens
cleaner or disc cleaner product.
Note related to transportation and movement
Before transporting or moving this unit, carry out
the following operations.
1 Switch the power ON.
2 Remove all discs and tape from the unit.
3 Turn the power OFF.
C D
N o D i s c C D R
N o D i s c
Note Note Note
Be sure to remove the front door before transport-
ing the unit.
6
÷ When CD 6 , CD-R 6 ,or TAPE 23 is pressed,
make sure that the display becomes as shown below.
Memory backup function
Even after the power cord is unplugged from the
wall outlet, the settings of the following items are
held in memory.
* The Sleep timer is canceled.
SKIP PLAY
T A P E
- - - -
Amplifier data
"on/standby" status
(ON or STANDBY)
Last input selection
Tone control levels (Bass, Mid, Treble)
AUX input level
Balance setting
Rec Gain setting
Tuner data
Auto/Manual setting
Timer setting contents*
Auto Power Save setting
Cassette deck data
Transport direction
DOLBY NR
Reverse mode
÷ Do not unplug the power cord from the power outlet
unless the power is switched off (STANDBY mode).