Sony HM-982RW - Manual (Page 22)

Playback of CD
22
Preparation section
Basic section
Apprication section
Knowledge section
Volume display
tape loading mechnism
1 1
2 2 3 3
1. Switching the power ON (OFF).
Hearing sound
3. Volume adjustment.
2. Selecting the desired output.
When the key is pressed while the power is ON, the power will be
switched OFF.
÷ When CD 6, CD-R 6 or TAPE 23 is pressed,
playback will start when a disc or tape already has
been inserted.
Listening through headphones
2 2
TUNER (Broadcasts) º
CD (CD player) ¢
CDR (CD recorder) §
TAPE (Cassette deck) •
AUX (Auxiliary analog source) f
D-AUX (Auxiliary digital source) f
Tone adjustment
Balance adjustment
Bass and treble compensation
Muting the sound
temporarily
÷ To protect the internal circuitry, the sound is muted for about 5 seconds after the
power is switched ON.
÷ Pressing the CD 6, CD-R 6, TAPE 23 23 23 23 23, TUNER/BAND or AUX/D-AUX key
on the main unit switches the power ON, selects the corresponding source
component and starts playback (or reception) on it. (One-Touch Operation function)
÷ When you press the
key to switch the power off (STANDBY mode), it may
sometimes take long time until the power is switched off. This is not malfunction;
please wait a while.
3 3
When CD has been se-
lected.
÷ The same function is also available using the
VOLUME keys on the remote control unit.
÷ The display shows a reference value (0~40).
When CD has been selected.
C D 0 1
0 : 0 0
C D 0 1
V o l 1 7
CD
6
VOLUME
3
3
1 1
Press the key.