Sony HM-982RW - Manual (Page 25)

Playback of CD
25
Knowledge section
Preparation section
Application section
Basic section
÷ Each press pauses and plays the CD alternately.
To pause playback
÷ Playback starts from the position where the key is re-
leased.
÷ Audio is not output during the fast forward or fast backward
operation during pause.
To fast forward and backward
Skipping tracks
÷ The track in the direction of the key pressed is skipped,
and the selected track will be played from the beginning.
÷ When the 4 key is pressed once during playback, the
track being played will be played from the beginning.
÷ To skip further to the previous track, press the 4 key
quickly.
÷ Tracks can be skipped by pressing the 4 or ¢ key even
in stop mode. In this case, playback starts automatically
after skipping.
To forward To backward
Press the numeric keys as shown below....
To enter track No. 12 ... +10, 2
To select track No. 20 .. +10, +10, 0
Playback from desired track
Select the desired
track No.
To stop playback
To skip backward To skip forward
Remote control unit only
Playback of CD
To remove a disc
Remote control unit only
Time display on CD player
Each press of the TIME key switches the displayed
information items one after another.
÷ When the total playing time of the tracks programmed for
program playback reaches 256 minutes or more, the
display shows “– –:– –” and the time display becomes
unavailable.
÷ When a non-CD-TEXT disc is played, the CD text informa-
tion display shows “------”.
Elapsed time of track
being played .........................
Remaining time of track
being played .........................
Elapsed time of
entire disc .............................
Remaining time on
entire disc .............................
CD TEXT data display
(Compatible disc only) ........
When discs conforming to CD-TEXT are played with
this unit, the text information recorded on the CD (disc
name or titles) is displayed automatically.
Some CDs conforming to CD-TEXT may not display
text information.The number of characters that can be
displayed is about 1000. "Text Full" is displayed if there
are more characters.
CD TEXT function
Remote control unit only
SINGLE
C D 0 2
0 : 0 7
SINGLE REMAIN
C D 0 2
4 : 5 3
TOTAL
C D 0 2
5 : 0 7
TOTAL
REMAIN
C D 0 2
5 4 : 5 3
C D 0 2
S A T I S F
1 2 3
4 5 6
7 8 9
+10
6
CD
STOP
7
4 ¢
P.CALL
0
22 33
TUNING