Siemens ISI EN 50295 - Manual (Page 111)

Siemens IK PI · 2004 6/111
AS-Interface Slaves
AS-Interface motor starters and IP65/67 load feeders
AS-Interface compact starters IP65 (400 V AC)
6
■
Selection and Ordering data (continued)
Design Order No.
Accessories for 24 V DC, M 12 connectors
6ES7 194-1KA01-0XA0
M12 coupler plug
For connecting actuators or sensors
5-pole 3RX1 667
M12 angular coupler plug
For connecting actuators or sensors
5-pole 3RX1 668
Y-shaped coupler plug, M12
For connecting two sebsors by means of individual cables
5-pole 6ES7 194-1KA01-0XA0
M12 sealing cap
For sealing unused input and output sockets
(one packing contains ten sealing caps) 3RX9 802-0AA00
Accessories for AS-Interface compact starter (Han Q 8/0)
3RK1 902-0CA00
3RK1 902-0CC00
3RK1 902-0AH00
Connector set for power infeed, 9-pole
Comprising
1 connector housing with Pg 16 cable gland
Female insert, 9-pole
Female contacts
• Suitable for cable 4 ´ 2.5 mm 2 , 6 ´ 2.5 mm 2 3RK1 902-0CA00
• Suitable for cable 4 ´ 4 mm 2 , 6 ´ 4 mm 2 3RK1 902-0CB00
Connector set for power loop-through connection, 9-pole
Comprising
1 connector housing with Pg 16 cable gland
1 male insert, 9-pole
6 male contacts
• Suitable for cable 4 ´ 2.5 mm 2
, 6 ´ 2.5 mm 2
3RK1 902-0CC00
• Suitable for cable 4 ´ 4 mm 2 , 6 ´ 4 mm 2 3RK1 902-0CD00
Connector set for motor connection, 1.5 mm 2 , 9-pole
Comprising
1 connector housing with Pg 16 cable gland
1 male insert, 9-pole
8 male contacts 1.5 mm 2
3RK1 902-0CE00
Blank plug for 9-pole power socket (-X3)
• One set contains one unit 3RK1 902-0CK00
• One set contains ten units 3RK1 902-0CJ00
Power connection cable
9-pole
• 6 ´ 4 mm 2 , 0.12 m long 3RK1 902-0CH00
• 4 ´ 4 mm 2
, 0.12 m long 3RK1 902-0CG00
Motor connection cable, 4 x 1.5 mm 2
With power connector, 9-pole
• Length: 3 m 3RK1 902-0CM00
• Length: 5 m 3RK1 902-0CP00
• Length: 10 m 3RK1 902-0CQ00
Motor connection cable, 6 x 1.5 mm 2
With power connector, 9-pole
• Length: 3 m 3RK1 902-0CN00
• Length: 5 m 3RK1 902-0CR00
• Length: 10 m 3RK1 902-0CS00
Crimping tool
• For male and female contacts 1.5 to 2.5 mm 2 3RK1 902-0AH00
• For male and female contacts 1.5 to 4 mm 2 3RK1 902-0CT00
Disassembling tool
for disassembling male and female contacts in 9-pole inserts 3RK1 902-0AJ00