Siemens ISI EN 50295 - Manual (Page 81)

Siemens IK PI · 2004 6/81
AS-Interface Slaves
I/O modules for operation in IP20 control cabinet
SlimLine
6
■
Technical specifications (continued)
2 inputs/2 outputs 4 outputs 4 outputs
Spring-loaded connection Screw-type connection Spring-loaded connection
Standard slave Standard slave Standard slave
2-wire -- --
Relay PNP transistor (1 A) PNP transistor (1 A)
3RK1 402-0BG00-0AA2 3RK1 100–1CE00–0AA2 3RK1 100–1CG00–0AA2
Total current input in mA £ 50 £ 40 £ 40
Inputs
• Sensor supply via AS-Interface Short-circuit and overload with-
stand capability -- --
• Voltage range in V 20 to 30 -- --
• Current carrying capacity
for sensor supply in mA
-- -- --
• Connection of sensors 2-wire system -- --
• Switching level High in V ³ 10 -- --
• Input current Low/High in mA £ 1.5 / ³ 5 -- --
Outputs
• Type of output Relay
changeover, floating Electronics (PNP) Electronics (PNP)
• Current carrying capacity
per output in A DC 12 / DC 13 typ.
-- 1 1
• Maximum summation current
per module in A
-- 2 2
• Short-circuit protection External back-up fuse necessary Built-in Built-in
• Inductive interference protection
(free-wheeling diode)
Not applicable Built-in Built-in
• Polarity reversal protection Not applicable Built-in Built-in
• External 24 V DC supply voltage Not applicable Via screw terminals
Terminal 7 ="+"
Terminal 10 = M Via screw terminals
Terminal 7 ="+"
Terminal 10 = M
• I
th
6 -- --
• AC-15 3 -- --
• DC 13 24 V 1 -- --
• DC 13 110 V 0.2 -- --
• DC 13 230 V 0.1 -- --
• Watchdog Built-in Built-in Built-in
I/O configuration 3 8 8
ID/ID2 code 0/F 0/F 0/F
Assignment of data bits
• Data bit D0 IN1 OUT1 OUT1
• Data bit D1 IN2 OUT2 OUT2
• Data bit D2 OUT1 OUT3 OUT3
• Data bit D3 OUT2 OUT4 OUT4
Connection Spring-loaded terminal connection Screw terminals Spring-loaded terminal connection
Conductor cross-sections in mm 2 Solid: 2 ´ (0.25–1.5)
Finely stranded with end sleeve:
2
´ (0.25–1)
Finely stranded without end sleeve:
2
´ (0.25–1.5)
AWG conductor connections solid
or stranded: AWG 2
´ (24–16)
-- Solid: 2 ´ (0.25–1.5)
Finely stranded with end sleeve:
2
´ (0.25–1)
Finely stranded without end sleeve:
2
´ (0.25–1.5)
AWG conductor connections solid
or stranded: AWG 2
´ (24–16)
Note Disassembly tool for spring-
loaded terminal connection:
See "Accessories" -- Disassembly tool for spring-
loaded terminal connection:
See "Accessories"