Siemens ISI EN 50295 - Manual (Page 75)

Siemens IK PI · 2004 6/75
AS-Interface Slaves
I/O modules for operation in IP20 control cabinet
Introduction
6
■
Overview
SlimLine S22.5/S45
Flat module
Module F90
For AS-Interface applications in the switchgear cabinet, various
module series are available for different requirements:
• SlimLine S22.5
• SlimLine S45
• Module F90
• Flat module
All modules of these series can be directly snapped onto stan-
dard rails or fixed with screws.
AS-Interface modules to the degree of protection IP20 have ter-
minals for direct connection to the AS-Interface cables and
therefore do not require a base unit.
1) For further information about these modules, see Section Actuator-Sensor-Interface / Modules with special functions / Counter modules
Series Range Mounting on 35 mm
standard rails to
DIN EN 50 022 Wall mounting using
push-in lugs
(Order No.: 3RP1 903) Other
possibilities
SlimLine S22.5 • 4I
• 4O
• 2I/2O (electronic/relay outputs)
• Counter
1 )
• Earth fault detection module
• • –
SlimLine S45 • 4I/4O (electronic/relay outputs)
• 4I/4O with floating I/O
• 4I/3O (A/B modules) • • –
Module F90 • 4I/4O (screw terminals)
• 4I/4O (connected via Combicon
connector)
• 16I
• – –
Flat module • 4I/4O (screw terminals)
• (encapsulated and embedded
PCB)
– – Integrated tags
for screw fixing