Siemens ISI EN 50295 - Manual (Page 96)

Siemens IK PI · 2004 6/96
AS-Interface Slaves
AS-Interface communication modules
Special integrated solutions
6
■
Technical specifications
4 inputs / 4 outputs 4 inputs
I/O supply via AS-
Interface cable
(max. 200 mA) I/O supply via external auxiliary voltage
(24 V PELV) Supply of outputs
via external
auxiliary voltage
(24 V PELV) -
Printed-circuit
board with solder
pins protected by
housing Printed-circuit
board with solder
pins protected by
housing Printed-circuit
board for horizon-
tal mounting Printed-circuit board with gold-plated
direct connector for 30-pin male multi-
point connector for easy mounting with
a direct connector
3RK1 400-0CD00-
0AA3 3RK1 400-0CD01-
0AA3 3RG9 005-0SA00 3RK1 400-1CD00-
0AA2 3RK1 200-0CD00-
0AA2
Slave type Standard slaves Standard slaves Standard slaves Standard slaves Standard slaves
Operating voltage in accordance
with AS-Interface specification in V 26.5 to 31.6 26.5 to 31.6 26.5 to 31.6 26.5 to 31.6 26.5 to 31.6
Total current input in mA £ 270 £ 25 £ 25 £ 270 £ 270
Input connection PNP PNP PNP PNP PNP
Inputs
• Sensor supply Via AS-Interface Via U
Aux
Via U
Aux
Via AS-Interface
cable Via AS-Interface
cable
• Switching voltage V 20 to 30 20 to 30 20 to 30 20 to 30 20 to 30
• Switching current in mA 3 3 3 – –
Outputs
• Type of output Electronics Electronics Electronics Electronics –
• Load voltage in V 20 to 30 19 to 30 19 to 30 U
Aux
- 0.8 V –
• Short-circuit protection Built-in Built-in Built-in Built-in –
• Inductive interference protection
(free-wheeling diode)
– – – Built-in (free-wheel-
ing diode) –
• External 24 V DC supply voltage Via solder pins Via solder pins Via solder pins Via circuit board
contacts –
Summation current for all inputs
and outputs in mA 200 200 200 200 200
I/O configuration 7 7 7 7 0
ID/ID2 code 0/F 0/F 0/F 0/F 0/F
Assignment of data bits
• Data bit D0 IN1/OUT1 IN1/OUT1 IN1/OUT1 IN1/OUT1 IN1
• Data bit D1 IN2/OUT2 IN2/OUT2 IN2/OUT2 IN2/OUT2 IN2
• Data bit D2 IN3/OUT3 IN3/OUT3 IN3/OUT3 IN3/OUT3 IN3
• Data bit D3 IN4/OUT4 IN4/OUT4 IN4/OUT4 IN4/OUT4 IN4
Approvals UL, CSA,
ship building UL, CSA,
ship building UL, CSA,
ship building – –
Degree of protection Enclosure IP20
Connection pins
IP00 Enclosure IP20
Connection pins
IP00 IP00 IP00 IP00
Ambient temperature in °C –25 to +70 –25 to +70 –25 to +70 –25 to +70 –25 to +70
Storage temperature in °C –40 to +80 –40 to +80 –40 to +80 –40 to +85 –40 to +85
Display Not available Not available Not available AS-i: green
Fault: red
I/O: yellow
L24+: green AS-i: green
Fault: red
inputs: yellow
LED status displays – – – AS-i
On
On
Flashing
On Fault
Off
On
On
Flashing Status
O.K.
No data traffic
Null address
Overload (sensor)