Siemens ISI EN 50295 - Manual (Page 84)

Siemens IK PI · 2004 6/84
AS-Interface Slaves
SlimLine
I/O modules for operation in IP20 control cabinet
6
■
Technical specifications (continued)
4 inputs/4 outputs 4 inputs/4 outputs
Spring-loaded connection Spring-loaded connection
Standard slave Standard slave
2- and 3-wire 2- and 3-wire
PNP transistor (1 A) Relay
3RK1 402-3CG01-0AA2 3RK1 402-3CG00-0AA2
Total current input in mA £ 40 £ 270
Inputs
• Sensor supply via AS-Interface Short-circuit and overload withstand capability Short-circuit and overload withstand capability
• Voltage range in V 20 to 30 20 to 30
• Current carrying capacity
for sensor supply in mA
200 200
• Connection of sensors 2- and 3-wire system 2- and 3-wire system
• Switching level High in V ³ 10 ³ 10
• Input current Low/High in mA £ 1.5 / ³ 5 £ 1.5 / ³ 5
Outputs
• Type of output Electronics Relay
• Current carrying capacity
per output in A DC 12 / DC 13 typ.
1 --
• Maximum summation current
per module in A
4 --
• Short-circuit protection Built-in External back-up fuse 6 A gL/gG
• Inductive interference protection
(free-wheeling diode)
Built-in Not applicable
• Polarity reversal protection Built-in Built-in
• External 24 V DC supply voltage Sensor supply:
Terminal 13 = U_s+
Terminal 19 = U_s–
Actuator supply:
Terminal 14 = L+
Terminals 20 to 24 = M Not applicable
• I
th
-- 5
• AC-15 -- 3
• DC 13 24 V -- 1
• DC 13 110 V -- 0.2
• DC 13 230 V -- 0.1
• Watchdog Built-in Built-in
I/O configuration 7 7
ID/ID2 code 0/F 0/F
Assignment of data bits
• Data bit D0 IN1/OUT1 IN1/OUT1
• Data bit D1 IN2/OUT2 IN2/OUT2
• Data bit D2 IN3/OUT3 IN3/OUT3
• Data bit D3 IN4/OUT4 IN4/OUT4
Connection Spring-loaded terminal connection Spring-loaded terminal connection
Conductor cross-sections in mm 2 Solid: 2 ´ (0.25–1.5)
Finely stranded with end sleeve: 2 ´ (0.25–1)
Finely stranded without end sleeve: 2 ´ (0.25–1.5)
AWG conductor connections solid or stranded:
AWG 2
´ (24–16)
Solid: 2 ´ (0.25–1.5)
Finely stranded with end sleeve: 2 ´ (0.25–1)
Finely stranded without end sleeve: 2 ´ (0.25–1.5)
AWG conductor connections solid or stranded:
AWG 2
´ (24–16)
Note 1 Disassembly tool for spring-loaded terminal
connection: See "Accessories" Disassembly tool for spring-loaded terminal
connection: See "Accessories"
Note 2 The module has four floating inputs and four
floating switching outputs. For the input and output
circuits, an external additional supply of 20 to 30 V
according to VDE 0106 (PELV) Safety Class III is
required. --