Siemens ISI EN 50295 - Manual (Page 44)

Siemens IK PI · 2004 6/44
AS-Interface Slaves
Digital I/O modules IP67 - K60
I/O modules for operation in the field
6
■
Technical specifications
Technical specifications common to all IP67 – K60 digital I/O modules
Operational voltage in accordance
with AS-Interface specification in V 26.5 to 31.6
Input connection PNP
Inputs
• Sensor supply via AS-Interface Short-circuit and overload
withstand capability
• Sensors 2- and 3-wire
• Voltage range in V 20 to 30
• Current carrying capacity f
or all inputs (T
u
£ 40 °C) in mA
200
• Switching level High in V ³ 10
• Input current Low/High in mA £ 1.5 / ³ 6
Outputs
• Type of output Electronics
• Short-circuit protection Built-in
• Inductive interference protection
(free-wheeling diode)
Built-in
• External 24 V DC supply voltage Over black AS-Interface flat cable
• Watchdog Built-in
AS-Interface certificate Available (or under application
in the case of new products)
Approvals UL, CSA, marine certification
(or under application in the case
of new products)
Degree of protection IP67
Ground connection PIN 5 of each M12 socket is
connected with the grounding
sheet in the mounting plate
through a pin
Ambient temperature in °C -25 to +85
Storage temperature in °C -40 to +85
Status indications
• I/O display Yellow LED
• Display U
Aux
Green LED
• AS-Interface/diagnostics display Green/red LED
Connection Using mounting plate for K60
compact module
Note 1 All K60 compact modules are
supplied with high-grade steel
screws/sockets
Note 2 To supply the output circuit,
an external supplementary
supply (AUX POWER)
of 20 to 30 V DC is necessary.
The supplementary supply must
comply with VDE 0106 (PELV),
Safety Class III.
8 inputs/2 outputs 8 inputs 8 inputs new
2 A -- --
A/B slave Standard slaves A/B slaves
Special assignment Y-II assignment Y-II assignment
3RK2 400–1HQ00–0AA3 3RK1 200–0DQ00–0AA3 3RK2 200–0DQ00–0AA3
Total current input in mA £ 300 £ 270 £ 270
Socket assignment, inputs PIN 1 = Sensor supply L+
PIN 2 = Data input II
PIN 3 = Sensor supply L-
PIN 4 = Data input I
PIN 5 = Earth connection PIN 1 = Sensor supply L+
PIN 2 = Data input II
PIN 3 = Sensor supply L-
PIN 4 = Data input I
PIN 5 = Earth connection PIN 1 = Sensor supply L+
PIN 2 = Data input II
PIN 3 = Sensor supply L-
PIN 4 = Data input I
PIN 5 = Earth connection
Outputs
• Current carrying capacity per
output in A DC 12 / DC 13 typ.
2 -- --
• Maximum summation current
per module in A
4 -- --
• Socket assignment, outputs 3 = "-"
4 = Output
5 = Ground connection -- --
I/O configuration 0 (Addr. 1) / 7 (Addr. 2) 0 0
ID/ID2 code A/E (Addr. 1 and 2) 1/F A/E
Assignment of data bits
• Socket 1 PIN4 = IN1(D0) (Addr. 1)
PIN2 = IN2(D1) (Addr. 1) PIN4 = IN1(D0) (Addr. 1)
PIN2 = IN2(D1) (Addr. 1) PIN4 = IN1(D0) (Addr. 1)
PIN2 = IN2(D1) (Addr. 1)
• Socket 2 PIN4 = IN2(D1) (Addr. 1) PIN4 = IN2(D1) (Addr. 1) PIN4 = IN2(D1) (Addr. 1)
• Socket 3 PIN4 = IN3(D2) (Addr. 1)
PIN2 = IN4(D3) (Addr. 1) PIN4 = IN3(D2) (Addr. 1)
PIN2 = IN4(D3) (Addr. 1) PIN4 = IN3(D2) (Addr. 1)
PIN2 = IN4(D3) (Addr. 1)
• Socket 4 PIN4 = IN4(D3) (Addr. 1) PIN4 = IN4(D3) (Addr. 1) PIN4 = IN4(D3) (Addr. 1)
• Socket 5 PIN4 = IN1(D0) (Addr. 2)
PIN2 = IN2(D1) (Addr. 2) PIN4 = IN1(D0) (Addr. 2)
PIN2 = IN2(D1) (Addr. 2) PIN4 = IN1(D0) (Addr. 2)
PIN2 = IN2(D1) (Addr. 2)
• Socket 6 PIN4 = IN2(D1) (Addr. 2) PIN4 = IN2(D1) (Addr. 2) PIN4 = IN2(D1) (Addr. 2)
• Socket 7 PIN4 = OUT1(D0) (Addr. 2)
PIN2 = IN3(D2) (Addr. 2) PIN4 = IN3(D2) (Addr. 2)
PIN2 = IN4(D3) (Addr. 2) PIN4 = IN3(D2) (Addr. 2)
PIN2 = IN4(D3) (Addr. 2)
• Socket 8 PIN4 = OUT2(D1) (Addr. 2)
PIN2 = IN4(D3) (Addr. 2) PIN4 = IN4(D3) (Addr. 2) PIN4 = IN4(D3) (Addr. 2)
Number of I/O sockets 8 8 8
Note Module requires two addresses Module requires two addresses Module requires two addresses