Siemens ISI EN 50295 - Manual (Page 125)

Siemens IK PI · 2004 6/125
AS-Interface Slaves
SIGNUM pushbuttons and indicator lights
AS-Interface customized enclosures
and front panel modules
6
■
Design (continued)
AS-Interface front panel module
The front panel module has one 4I/4O slave, four SIGNUM 3SB3
command devices as well as the necessary mounting accesso-
ries.
The rear of the module is plugged onto a group of four command
devices that are arranged in a vertical or horizontal row and
screwed in place. The command devices must be mounted in a
grid pattern of 30 mm x 45 mm. The shaped AS-Interface cable
is connected via a connection terminal on the rear of the module
using the insulation piercing method.
The module is addressed via the AS-Interface terminals or via
the built-in addressing socket.
■
Selection and Ordering data
1) Ordering example for AS-Interface enclosure with four command
points:
3SF5 804-4AZ
KOY
Equipment according to order supplement
for AS-Interface enclosure
(<- For form for order supplement, see section Options)
2) Ordering example for AS-Interface front panel module:
3SF5 874-4AZ
KOY
Equipment according to order supplement
for AS-Interface front-panel module
(<- For form to complete order supplement, see section Options)
■
Options
To order customized AS-Interface solutions for SIGNUM 3SB3
control devices, please fill out the corresponding enclosed order
form and enclose it with the order.
Enter the desired options into the order form, such as type of
actuating elements, switch contacts, lampholders or accesso-
ries (labels or the like). The codes that are to be entered in the
form can be obtained from the list of options that are subject to
a surcharge.
The price of the device is calculated from the basic price of the
respective version and the additional prices for the comple-
ments (refer to price list).
The additional prices include all components which depend on
the selected configuration options, i.e. type of actuating ele-
ments, contacts, lampholders and accessories, such as labels,
lamps, connections sockets, a second slave etc.
Design Order No.
AS-Interface enclosure, equipped as required 1)
• Two command points 3SF5 802-4AZ
• Three command points 3SF5 803-4AZ
• Four command points 3SF5 804-4AZ
• Six command points 3SF5 806-4AZ
AS-Interface front-panel module, equipped as required 2)
Four command points
3SF5 874-4AZ