Kawasaki STX-15F - Manual (Page 12)

1-2 GENERAL INFORMATION
Smart Learning Operation mode (SLO) (JT1500-A2 model ∼ )
This watercraft is equipped with the Smart Learning Operation mode (SLO) and normal operation
mode (Full Power Operation, FPO). The SLO mode reduces the maximum watercraft speed by ap-
proximately 30 percent for a use by unskilled operators. To change the SLO mode to FPO mode, and
back again, push the “MODE” button for 7 seconds or more.
SLO mode is displayed on the meter as SLO.
NOTE
○
When shifted to the SLO mode, the initial display, as
shown when the ignition switch is turned on, is shown
together with a buzzer sound.
○
Then, “SLO” is shown blinking at every three seconds.
○
Under the SLO mode, all the meter displays and other
functions work in the same manner as the normal oper-
ation (Full Power Operation, FPO) mode.
Normal operation mode (Full Power Operation mode, FPO)
is shown by FPO display.
NOTE
○
When shifted to the normal operation mode (Full Power
Operation mode, FPO), the same initial display is first
shown and followed by “FPO” for two seconds. How-
ever, “FPO” is shown only once when shifted and is not
displayed thereafter.
○
When the ignition switch is turned off and on again, the
same mode when turned off is displayed again.