Kawasaki STX-15F - Manual (Page 19)

GENERAL INFORMATION 1-9
Before Servicing
Circlips, Cotter Pins
Replace circlips or cotter pins that were removed with new
ones. Take care not to open the clip excessively when in-
stalling to prevent deformation.
Lubrication
It is important to lubricate rotating or sliding parts during
assembly to minimize wear during initial operation. Lubri-
cation points are called out throughout this manual, apply
the specific oil or grease as specified.
Direction of Engine Rotation
When rotating the crankshaft, by hand, the free play
amount of rotating direction will affect the adjustment. Ro-
tate the crankshaft to positive direction (counter-clockwise
viewed from stern sinde).
Electrical Wires
A two-color wire is identified first by the primary color and
then the stripe color. Unless instructed otherwise, electrical
wires must be connected to those of the same color.