Kawasaki STX-15F - Manual (Page 129)

FUEL SYSTEM (DFI) 3-75
Inlet Manifold
Inlet Manifold Removal
•
Remove:
Supply Fuel Hose [A] at Delivery Pipe
Return Fuel Hose [B] at Delivery Pipe
Delivery Pipe Mounting Bolts [C], Collars and Clamps
•
Remove the bands [D] and disconnect the following con-
nectors.
Camshaft Position Sensor Connector [E]
Crankshaft Sensor Connector [F]
•
Disconnect:
Throttle Cable Lower End (see Throttle Cable Removal)
Throttle Sensor Connector [G] on Throttle Body Assy
ISC (Idle Speed Controller) Connector [H] on Throttle
Body Assy
Inlet Air Pressure Sensor Connector [I] on Inlet Manifold
Inlet Air Temperature Sensor Connector [J] on Inlet Man-
ifold
•
Unscrew the inlet manifold mounting bolts [A] and nuts
[B].