Kawasaki STX-15F - Manual (Page 325)

HULL/ENGINE HOOD 13-19
Rubber Parts
Side Bumper Removal
•
Take out the plugs [A].
•
Drill out the rivets [B] (see Rivet Removal).
•
Remove the corner bumper [C].
•
Remove the trim strip [A] from the side bumper [B].
•
Drill out the rivets [A] (see Rivet Removal).
Side Bumper Installation
•
Secure the side bumpers to the hull flange with the rivets
(see Rivet Installation).
•
Install the trim strip.