Kawasaki STX-15F - Manual (Page 137)

FUEL SYSTEM (DFI) 3-83
Fuel Filter
Fuel Filter Installation
•
Route the hose correctly (see Cable, Wire, and Hose
Routing section in Appendix chapter).
•
Install the fuel hoses to the fuel filter, noting its “IN” fitting
[A] and “OUT” fitting [B].
○
For JT1500-A2 model ∼ ; Replace the double spring
clamps with new ones. (see Fuel System Diagram)
Install the holder and apply a non-permanent locking agent
to the mounting bolts and tighten them.
Torque - Fuel Filter Mounting Bolts: 8.8 N·m (0.90 kgf·m, 78
in·lb)