Kawasaki STX-15F - Manual (Page 304)

12-18 STEERING
Reverse System
•
Pull the holder [A] off the cable bracket.
•
Remove the right side cover (see Hull/Engine Hood chap-
ter).
•
Unscrew the bolts [A] and remove the cable bracket.
NOTE
○
The collors on the inside of the hull will drip down when
the bolts are removed.
•
Remove the ball joint [A] and cable bracket [B] from the
shift cable [C].
•
Cut off the band [A] holding the shift cable [B] and inlet
cooling hose [C] for the oil cooler.
•
Cut off the band [A] holding the shift cable [B].
Bow [C]