Life Fitness 93T User Manual
Page 121
3-6
Washer
Lock
Washer
Bolt
Front Roller
(LT Side)
Left End
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Striding Belt and Deck - Continued
Special Service Tools Required: NONE
8. Insert a flat blade screwdriver into the slotted
end of the Idler Arm. Raise the Idler Arm just
enough to install an Allen wrench into the
access hole of the Idler Arm to keep it in a
raised position.
CAUTION: DUE TO EXTREME SPRING
TENSION, DO NOT RAISE THE IDLER ARM ANY
HIGHER THEN NECESSARY.
9. Remove the mounting bolt, lock washer,
and flat washer securing the Front Roller
Shaft at the left side of the Frame.
Note: Illustration shows Striding Belt
removed for purposes of clarity.
10. Move the left end of the Front Roller
Shaft into the left side of the Frame.
Screwdriver
Front Roller
Drive Belt
Idler Pulley
Idler Arm
Allen Wrench