Life Fitness 93T - Manual (Page 153)

3-38
Telemetry
Cable
Telemetry
Receiver
Adhesive
Pad
Console
Front
Console
Back
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Telemetry Receiver
Special Service Tools Required: NONE
1. Turn the unit power OFF at the
switch then unplug the line cord at
the wall outlet.
2. Remove eight screws from the
Console Back. See “How To…” in
this section.
3. Lift off the Console Front and
disconnect necessary wiring.
4. Remove the Telemetry Receiver and
Cable from the inside left corner of
the Console Front, which is held in
place with an adhesive pad
5. Install new Telemetry Receiver with
new Adhesive Pad in reverse order.
6. Re-install the Console Front to the
Console Back, making sure all
connectors are firmly installed.