Life Fitness 93T - Manual (Page 173)

4-10
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
ELECTRONIC OVERVIEW - WAX LIFT PCB
Description Location Function
LED1 Flashes when the control processor and the main processor
are running. (Console board)
LED2 ON when lift motor is going up
LED3 ON when lift motor is going down
LED4 ON when 0% switch is closed
LED5 ON when bottom limit switch is engaged
4 & 5 on when at
0% on 93Ti & 95Ti
only.
LED6 Flashes when Control UP is running
LED7 Green indicates that +12VDC output is ON
Service LED
LED8 Red indicates that +8VDC output is ON
FUSE 1 2 Amp 120VAC supply for low voltage power supply
FUSE 2 4 Amp 120VAC supply power for lift motor
FUSE 3 4 Amp 120VAC supply power for lift motor
FUSE 4 0.5 Amp 12VDC supply to console Emergency stop switch
FUSE 5 1 Amp 8 VDC (Supply power to console electronics, Smart
stop, and CSAFE (RJ45 connector))
FUSES
FUSE 6 1 Amp 8VDC (Supply to console CPU)
Relay 1 and 2 Drives Lift Motor
Relay 3 (12VDC coil) NOT USED
Relay Switch
Relay 4 (12VDC coil): Relay 4 supplies AC input to the Wax/Lift Circuit
JW1 One(1) wire system Jumper (JW)
JW2 Two(2) wire system