Life Fitness 93T - Manual (Page 41)

2A-16
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
DIAGNOSTICS: SYSTEM TEST – INCLINE MANUAL
During this test, the letters IM (INCLINE MANUAL) appear in the profile window. This test allows operation of the lift
motor via the incline ARROW keys. The COUNT defines the movement request in software terms, and ACTUAL
incline is displayed in the message center. The state of the level and negative incline switches will be displayed in
the profile window.
For non-decline units: The state of the level switch will be displayed in the profile window. A zero “0” displayed in
the profile window shows the level switch in the closed position. As the unit is inclined the zero “0” displayed should
disappear to indicate that the level switch is functioning.
For decline units: The state of the level and negative incline switches will be displayed in the profile window. A zero
“0” displayed in the profile window shows the level switch in the closed position. As the unit is declined the zero “0”
displayed should disappear and a “–4” should appear in the profile window. This verifies that the negative switch is
functioning (the “–4” will only appear in incline manual mode).
The speed system can be activated in this test as well. However, the display will only show the target speed for two
seconds while the speed keys are being pressed. It will then return to show the incline information.
Press the ‘CLEAR’ key to exit the Incline Manual test and return to the Incline Automatic test.
Press the ‘ENTER’ key to advance to the Incline Errors test.
INCLINE MANUAL
I M