Life Fitness 93T - Manual (Page 14)

1-7
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
TROUBLESHOOTING GUIDE
SYMPTOM PROBABLE CAUSE CORRECTIVE ACTION
Rubbing sound from
underneath machine. Foreign objects may be stuck
underneath the machine. Inspect underneath striding belt and
machine. Remove any debris or
objects that may cause interference
with the treadmill.
Display reads immobilized. Immobilized feature is activated. Press and hold the SPEED Down
Arrow Key and press the Pause Key to
toggle ON/OFF.
Drive Motor Belt tensioning pin may be
squeaking. Clean and lubricate as necessary. Squeaking noise.
Drive Motor Belt may be worn or
damaged. Replace Drive Motor Belt. See How
To… Replace Drive Motor Belt.
Lift mechanism pivot points are dry. Clean and lubricate as necessary.
Faulty lift motor. Replace the lift motor. See How
To…Replace Lift Motor.
Loud groaning sound heard
from front of machine while
elevating.
Obstruction. Inspect wheels or flooring for damage.
Loud groaning on footfall. High friction between deck and striding
belt. Refer to Belt and Deck Test in
Diagnostics.
Loose ribbon connection(s). Test the Key Pad function. See
Diagnostics in this Section. Verify that
the two ribbon connections are
attached to the display PCB. Test Key
Pad function.
If attached, reseat the connection and
verify the operation.
Display overlay keys are
not responding when
depressed.
Worn or defective overlay assembly. Replace overlay assembly. See How
To… Replace Overlay Assembly.
Insufficient power source. Plug treadmill into a proper electrical
configuration. Refer to the Operations
Manual.
Damaged ground prong on line cord. Replace line cord. See How To…
Replace Line Cord.
Line cord improperly seated in
electrical outlet. Inspect power connection at electrical
outlet and at machine for proper
contact.
Emergency stop magnet not engaged. Re-engage the emergency stop
magnet.
Towel or magazine may be making
contact with stop switch while user is
running. Move all possible obstructions off
display console and handlebar.
Unit resets randomly or
pauses.
Loose connections at display console. Secure all connections at display
console PCB.