Life Fitness 93T - Manual (Page 133)

3-18
Access
Hole
End of
Shaft
Right End of Front Roller as Viewed From Front of Unit
Striding
Belt
Front
Roller
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Front Roller - Continued
Special Service Tools Required: NONE
7. Move the Left Front Roller Shaft end into the Left
Side of the Frame so that the right side of the
Pulley Shaft end clears the Access Hole in the
right side of the frame to allow the Motor Belt
clearance for removal. Slip the Motor Belt off the
Front Roller Pulley at this time.
8. From the right side of the frame,
remove the Front Roller out from
under the Striding Belt.