How to... tension new striding belt – Life Fitness 93T User Manual
Page 124
Advertising
3-9
50”
Tape
50.25”
Tape
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Tension New Striding Belt
Special Tools Required: None
1. Center the loose striding belt on front
and rear rollers.
2. Place two pieces of masking tape 50”
apart on the right and left side edges
of the striding belt as shown.
3. Tighten tensioning bolts until the
distance between tapes (both sides)
is increased to 50.25”. At this point,
the belt is properly tensioned.
4. Adjust the striding belt tracking. See
How To... Adjust the Striding Belt
Tracking.
NOTE: Refer to MAINTENANCE in
diagnostics section to log this event.
Advertising