Life Fitness 93T - Manual (Page 154)

3-39
Main Wiring
Harness
HR & Smart
Stop Cables
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Main Wire Harness
Special Service Tools Required: NONE
1. Turn the unit power OFF at
the switch, and then unplug
the line cord at the wall
outlet.
2. Remove the Inside Upright
Covers, Front Cover, and
Motor Cover. See “How
To…” in this section.
3. Remove the Console
Assembly. See “How To…”
in this section.
4. Disconnect the Main Wiring
Harness from the Motor
Controller, and then pull out
the Main Wiring Harness.
5. Install new Main Wiring
Harness through the top of
the Left Upright (Upright),
and connect to the Motor
Controller.
6. Reconnect to the Console Assembly.
7. Install
Covers.