Life Fitness 93T - Manual (Page 146)

3-31
Smart Stop
Circuit Board
(Part of the Smart
Stop Cover Assembly)
Mounting
Screws
Smart Stop
Cover Assembly
ERGO Bar
Handrail
Foam Backing
(Part of the Smart
Stop Cover Assembly)
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Smart Stop Circuit Board
Special Service Tools Required: NONE
Note: The Circuit Board and Foam
Backing are part of the Smart Stop
Cover Assembly. The illustration
below shows an exploded view of
these components for clarity
purposes only.
1. Turn the unit power OFF at the
switch then unplug the line
cord at the wall outlet.
2. Remove two screws from the
back of the ERGO Bar
securing the Smart Stop Cover
Assembly, and then lift off the
Smart Stop Cover just enough
to disconnect the 4-Pin
Connector from the Smart
Stop Circuit Board.
3. Remove and discard the
Smart Stop Assembly.
4. Install new Smart Stop Assembly in reverse order.